Schematic changes on 04/26/2010 to deal with part value changes due to supply issues. 

DCM Card
- Changed R1 from 15k to 4.3k (0.5W, 350V)
- Changed R5 & R10 from 2.2k to 4.3k (0.5W, 350V)
- Changed R6 & R11 from 150 to 300 (0.25W, 350V)
- Added 0015249245 (all gold) as an alternate for backplane conn part number 0015246243 (select gold)
- Added MPSA44 as alternate for KSP44
- Changed R2, R3, R7 & R8 from 1.5M to 1.6M (0.5W, 3.5kV)
- Changed R4 & R9 from 4.3k to 3.9k (3W, 750V)
- updated to Rev 3.2
- output new BOM and schematic pdf

FEB Card
- Changed R7, R14, R21 & R28 from 2.2k to 4.3k (0.5W, 350V)
- Changed R8, R15, R22 & R29 from 150 to 300 (0.25W, 350V)
- Added 0015249245 (all gold) as an alternate for backplane conn part number 0015246243 (select gold)
- Added MPSA44 as alternate for KSP44
- Changed R2, R4, R9, R11, R16, R18, R23 & R25 from 1.5M to 1.6M (0.5W, 3.5kV)
- Changed R5, R12, R19 & R26 from 4.3k to 3.9k (3W, 750V)
- updated to Rev 3.2
- output new BOM and schematic pdf

IND Card
- Changed R7 from 910 to 820 (0.25W, 350V)
- Added comment that 3.3V LED needs to handle up to 7V
- Changed R6 from 15k to 4.3k (0.5W, 350V)
- Added 0015249245 (all gold) as an alternate for backplane conn part number 0015246243 (select gold)
- Changed D1 from BZW04-48 to FAIRCHILD SEMICONDUCTOR P6KE56A due to BZW04-48 becoming obsolete.  Tested that P6KE56A will work fine as a replacement.
- updated to Rev 3.2
- output new BOM and schematic pdf

Backplane
- Changed R1 from a non-inserted 10K 3W 750V resistor to a 0 ohm 0.5W 500V resistor but without changing the footprint.
- Split busbars into two types, Busbar_source and Busbar_return, but no change to the footprint
- removed mounting holes from schematic/BOM
- changed footprint name for R2 to RES600_42 (was RES600_38)
- updated to Rev 3.2
- output new BOM and schematic pdf