Final Schematic changes on 01/05/2010 to deal with fusing of the 24V DCM.

Backplane
- changed 24V DCM trace width specification to 11A (to match DCM card spec)
- added a specification for the GND_Case to be 24A (to match DCM & FEB card specs)

DCM Card
- changed 24V DCM fuse to 6.3A
- changed 24V DCM trace width specification to 11A (8.0A * 140%, 1 sec. blow)
- removed the switch
- added a specification for the GND_Case to be 24A (addition of all currents 3.3V & 24V for two FEB channels + 24V DCM = 23.0A but FEB cards specify 24A, so made DCM card the same as FEB card for consistency and since DCM card's needs are not greater than FEB card)

FEB Card
- added a specification for the GND_Case to be 24A (addition of all currents 3.3V & 24V for four FEB channels)